S13

S13 180SX Silvia 240sx Parts.

Check your orders with:

Some paypal buttons are missing, will add them as soon as possible, please e-mail me on those particular itmes....

Brakes.

Front Brembo Drill/Sloted Brake Kit.

This top quality brakes made in Italy will not disapoint you, a must have when pushing high horse power, you must have a 5 lug conversion all ready for this kit to work on an S13, modification may be require.

The kit inclused 2 13" cross or sloted drilled rotors, 2 4 pot calipers with your choice of silver red or black, ss brake lines, harware and caliper brakets.

$3250.00

$40.00

Drilled:

Part #: 1B1.7012A

Sloted:

Part #: 1B2.7012A

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Suspension.

Tein Performace Lowering Springs.

89-94 S13 Lowering Springs will drop your car 1.5" on the front and 1.2" on the back, the spring rate is 207 Ft and 179 Rr, this springs will work goof with stock strut, Tokico or KYB.

Rubber Spring Protectors are include it.

$195 set of 4

$16.50 Shipping

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Part #: SKP04-AUBOO

Tein Basic Damper Coil Over Kit.

TEIN type BASIC damper offers a high quality coilover system at an entry level price. Drivers will feel in increase in stability, and grip, while maintaining good ride quality on the street and freeway. A shortened shell case is utilized to allow for better ride and improved performance at lowered ride heights. BASIC damper is a great option for consumers wanting a simple and quality made coilover. Each application is test fitted and road tested to ensure the best possible balance between comfort and performance on the street. Includes ride height adjustment to give your vehicle a minor to major drop.

This set is for front and back.

$969.99 ea set

$25.00 Shippping

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Part #: DSP04-LUSS2

89-94 S13 Tein Super Street Damper Coil Over Kit.

From Tein:

TEIN Super Street damper kit was designed for drivers seeking improved handling on the street and at the track. A shortened shell case is utilized to allow the most piston stroke possible, which allows for a better ride at lowered ride heights, and increased grip at the track. Great for daily driving and occasion track use, whether it be at the drag strip, local circuit, or Auto-X course. Includes both ride height and damping force adjustment to allow the driver to dial in the suspension for various surface conditions.

This kit is for front and back, also adjusting wrenches are include it.

$1325.99 ea set

$25.00 Shipping

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Part #: DSP04-KUSS2

Tein Type Flex Dampers

From Tein:

The MONO FLEX coilover kit has been developed for entry-level competition motorsports and advanced street driving. Features include 16-way damping force adjustability (combined compression and rebound), a mono-tube internal design, pillowball upper mounts, and EDFC compatibility. There are independent adjustments for ride-height and spring pre-load settings for increased suspension tuning. The new Mono Flex also includes TEIN's latest technological innovation, Micro Speed Valving (MSV) system, which allows the driver to feel a greater difference in damping force adjustments. Designed and developed for consumers seeking aggressive handling on the street and at the track.

This kit is for front and back, also adjusting wrenches are include it and front and rear pillow ball.

$1930.00 ea kit

$25.00 Shipping

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Part #:GSP04-FUSS1

Tein Super Drift Dampers.

From Tein:

TEIN's support of competition D1 drivers and vehicles has led to the development of Super Drift dampers. Which were specifically developed for the avid drifter. Spring rates and damping force characteristics were chosen to increase car control in a drift, and to aid in initiating a slide. Full length and 16 level damping force adjustment allow suspension tuning for drivers at all skill levels. Pillowball upper mounts with front camber adjustment plates are included*. EDFC compatible for quick and hassle free dampening force changes. Super Drift is the suspension of choice for all levels of drifters.

This kit is for front and back, also adjusting wrenches are include it and front and rear pillow ball.

$1640.00 ea kit

$25.00 Shipping

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Part #: GSN20-DUSS1

89-94 S13 Tein Front Tower Bar.

TEIN aluminum Performance Bars are produced in two designs, round and oval. By using A6000 aluminum TEIN has been able to produce bars, which are not only lightweight but are also exceptionally rigid. The twist and flex that occurs in performance driving is reduced, therefore allowing the driver to obtain the full potential of the suspension. Features include green anodized mounting plates, polished aluminum bar, and EDFC compatibility.

Additional Features:
• Specifically tested for each application
• A6000 Aluminum Construction
• Oval type features a two column design for increased rigidity
• Round type feature turnbuckle ends
• Anodized mounting plates
• EDFC compatible
• 3-piece design for ease of installation and removal

Contents of Performance Bar kit:
Mounting plates × 2
Performance Bar × 1
Aluminum TEIN Badage × 1
Instruction Manual × 1
Serration nuts are included for some vehicle models

$130.00 ea

$12.00 Shipping

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Front:

Part #: PBN20-01000

Rear:

Part #: PBN21-01000

89-94 Tein Pillow Ball Tension Roads.

Complete your suspension with this set of two tension roads and replace your old wared out OEM bushing type roads.

$275.00 ea set of 2

$12.50 Shipping.

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Part #: PTN20-11S00

89-94 Tein Front/Rear Pillow Ball Uper Mount.

This kit is a must have upgrsde in any coil over application or can aslo be used with high performance struts like Tokiko or KYB.

For BASIC/SS/HA/HE

$170.00 ea front set of 2.

$10.00 Shipping

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Front:

Part #: PAN20-31PFR

Rear:

Part #: PRN21-31S70

Universal Tein Adjusting Wrench.

This is the new redesing Adjustin Wrench with multipurpose use, making universal to most Tein Products (old and recent).

$24.00 ea set of 2.

$5.50 shipping

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Product #: ADJ Wrench

89-94 S13 Front Cusco Pillow Ball.

This are top quality suspension components, a great addition to complete your suspension if you are running coil overs or lowering springs with out them.

$250.00

$10.00 Shipping.

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Part #: 220410A

Cusco Sway Bars.

Cusco Anti-Sway Bars will keep you car on the ground better reducing body roll during hard cornering and fast speeds, this are offer only in Cusco blue and made of 28mm steel for the front and 18mm for the rear.

Front.

$280.00ea

$25.00 Shipping

Part #: 220311A28

Rear.

$210.00ea

$22.50 Shipping

Part #: 220311B18

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Cusco Type OS Front and Back Tower Bars.

Cuscos's most popular bar in most application due to look and efficency, the aluminum bar possesses high rigidity due to the two different designs available. The Type 1 is pressed ribbed while the Type 2 is sectioned. Cusco has already chosen the ideal design for each application.

Front.

$163.00ea

$15.00 Shipping

Part #: 221540A

Rear.

$163.00ea

$15.00 Shipping

Part #: 220541A

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Cusco Type OS-T Rear 3 Point Section Tower Bar.

The Type OS-T bar is an add on to the rear Type OS which MUST be purchased prior to fitting the OS-T portion. It comes with all the required hardware for installation and holes are required to be drilled in order for the floorboard mount to be attached. The OS-T bar can be fitted with the Type 40 and Type CB as well.

$130ea

$15.00 Shipping

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Part #: 220544A

Energy Suspension Polyurathane Bushing Kit for models 89-94.

HYPER-FLEX SYSTEM Complete Master Bushing Set Includes: Front strut rod bushings, front control arm bushings, rack & pinion bushings, 24mm & 25mm front sway bar and end link bushings, rear subframe inserts, rear suspension arm bushings, and rear sway bar end link bushings.

$180.37

$15.00

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Part #: 7.18106

Interior

Cusco Emergency Brake Knob (Drift Knob).

This particular knob not only gives your S13 a better look but also helpd you get a beter grip on it when drift.

This installs in the e-brake to eliminate the need to press the button in order to release the lever.

$21.90ea

$5.00 Shipping

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Part #: 220-014-AA

Cusco Shift Knob

This will fit your S13 Chasis with any engine application you may have (KA, SR or CA).

$30.00 ea

$5.00 Shipping

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Part #: 00B7603WWW

HKB Steering Wheel Hub for S13

This very well hand crafted Steering Wheel Hub made in Japan will work on your 89-94 s13 using Nardi, MOMO, Personal, Abarath, Indy, Raid and Italvolanti dteering wheels.

Don'y buy cheap stuff made in PRC get the real deal!

$65.99 ea

$7.95 Shipping

Shipping s to the lower 48, please contact me for other parts of the world and local pick up.

Part # ON-07

B&M Sr20/CA18/KA24 Short Shifter.

This short shifter will work with any of the engines above.

With this high performance shifter you will cut those long gears in about half its original travel time, and also will also work fine as daily driver as gears go in really smooth.

$225.39 ea

$14.00 Shipping

Shipping is to the lower 48, please contact me for other parts of the world.

Part #: 4508

Sprint 5 Competition Seat.

Sparco Competition Seat, universal fit with proper bracket and slider.

Your choice of blue, black or red please let us know what color you need.

Brackets and sliders are sold separatly!

$299.00 each

$60 shipping

Shipping is to the lower 48, please contact me for other parts of the world.

Speed Competition Seat.

Sparco racing seat, universal fit with proper braket and slider.

Your choice of black or red please let us know what color you need.

Brackets and sliders are sold separatly!

$329.00 each

$60.00 shipping

Shipping is to the lower 48, please contact me for other parts of the world.

Exhaust System

89-94 S13 HKS High Power Exhaust.

This particular catback comes in two sizes 85mm and 65mm, 85mm should be use on Turbo engines and the 65mm on NA.

This is a very top notch system that will help your engine release backpreasure from the engine and will also give you a really nice sound!

85mm

$585.00 ea set.

$40.00 Shipping

Part #: 31006-KN005

65mm

$585.00 ea set

$40 Shipping

Part #: 32003-KN002

Shipping is to the lower 48, please contact me for other parts of the world.

Universal HKS High Power Exhaust.

This universal muffler is made with the same quality as the catback system is but this can work real well for your project with custom piping.

There are 2 sizes available 75mm and 60mm.

75mm

$280.99 ea

$23.50 Shipping

Part #:3106-EX007

60mm

$250.99 ea

$23.50 Shipping

Part #: 3203-EX023

Shipping is to the lower 48, please contact me for other parts of the world.

Carbon-TI Universal muffler.

This universal muffler is made with the same quality as the catback system is, but this can work real well for your project with custom piping, the carbon fiber adds a very nice and good look that will make your dime stand out. Includes Stainless Steel Mounting Bracket.

75mm pipe diameter.

$350.00 ea

$23.50 Shipping

Shipping is to the lower 48, please contact me for other parts of the world and local pick up.

Part #: 31012-BA001

Universal Stainless Hi-Power Ti Muffler

This hight quality universal muflers are available in 60mm and 75mm dia piping.

Custom Piping is require to instal this particular part. (it can be done at a muffler shop).

60mm

$270.00ea

23.50 Shipping

Part #: 34005-FK002

75mm

299.99ea

23.50 Shipping

Part #: 34005-FK001

Shipping is to the lower 48, please contact me for other parts of the world and local pick up.

Universal Titanium Muffler.

Make your dime look different with this top notch titanium muffler.

The universal HKS Titanium muffler assembly is back by popular demand in a limited production. The Titanium muffler is available in 60mm piping diameter for use with custom exhaust applications. All units include S/S slip-on sleeve, bracket, and hardware.

$335.00 ea

$23.50 Shipping

Part #: 31008-XA001

Shipping is to the lower 48, please contact me for other parts of the world and local pick up.

Engine Transmision

89-94 S13 Cusco Motor Mounts.

No inserts here, just complete mounts, this kit will give you a more stiff ride as it will remplace your old oem ones.

$188.00 ea set

$10.00 Shipping

Part #: 223910A

Shipping is to the lower 48, but I will ship world wide just contact me for a quote.

S13 SR20DET Cusco Super Single Clutch.

This clutch is very light weight but at the same time can hold up to 400hp so it gives you the nice balance between harcore racing and more moderate racing.

Pick this clutch up today and feel the difference!

$1075.00ea

$22.65 Shipping

Shipping is to the lower 48, but I will ship world wide just contact me for a quote.

Part #: 221022SP

Heavy Industries

the real jdm source!!!